B200 M3

Cisco UCS5108 + 8 x B200 M3 Blade Servers 16 x EIGHT-CORE 2.60GHz, 1536Gb RAM, 10Gb VICN20-C6508 V02 In good condition and full working order Included Chassis1 x Cisco UCS5108 Blade Chassis N20-C6508 V022 x 2208XP 8-Port 10GbE Fabric Extenders UCS-IOM-2208XP4 x Power Supplies8 x Fans1 x Pair Of RailsServers8 x B200 M3 Servers UCS-B200-M3Each With:2 x Intel Xeon EIGHT-CORE E5-2670 2.60GHz Processors192GB Ram1 x 4-Port 10Gb Virtual Interface Card UCSB-MLOM-40G-012 x Cisco 1TB SATA Enterprise 7.2k hot plug drives The UCS 5108 chassis is a 6RU chassis the that can accommodate up to 8 half-width blades or 4 full-width blades, or any combination that will fit in the chassis. The chassis has two I/O bays for Fabric Extenders such as the UCS 2208XP or Fabric Interconnects such as the UCS 6324.SpecificationsHeight: 10.5 in. (26.7 cm); 6 rack unit (6RU)Width: 17.5 in. (44.5 cm); fits standard 19-inch square-hole rack (or round hole threaded or non-threaded, with optional adapter kit)Depth: 32 in. (81.2 cm)Weight: 90 lbs (40.83 kg) empty, 255 lbs (115.66 kg) fully configuredBlade server slots: 8 half-width slots, 4 full-width slots, or combination of half- and full-width slots.IO slots (for FIs or FEXs): 2Fabric Extenders: Compatible with 2208XP, 2204XP, and 2104XP Fabric ExtendersFabric Interconnects: Compatible with 6324 Fabric InterconnectsPower: Four Power Supplies supporting N, N+1 and N+N Grid redundancy.Fans: 8 hot-swappable fans, Each fan module contains 2 redundant fans; up to two fans can fail in the system.Management: Managed from the Cisco UCS 6100/6200 Series or 6324 fabric interconnects by Cisco UCS Manager (redundant management operations when the chassis is configured with two fabric extenders or two 6324 fabric interconnects)Backplane: 1.2 TB of aggregate throughput; supports 10BASE-KR connections for 8 bladesRegulatory compliance: Products comply with CE Markings per directives 2004/108/EC and 2006/108/ECAC input voltage: Voltage Range 100-120 VAC, 200-240 VAC nominal (range: 90-132 VAC, 180-264 VAC)AC input frequency: 50 to 60 Hz nominal (range: 47 to 63 Hz)AC Input current: < 15 Amps @ 100 VACMaximum Input VA: 2790 VA @ 200 VACMaximum output power per power supply: 2500 W at 200 to 240 VAC (up to four power supplies) Delivering performance, versatility and density without compromise, the Cisco UCS B200 M3 Blade Server addresses the broadest set of workloads, from IT and web infrastructure through distributed database.The enterprise-class Cisco UCS B200 M3 blade server extends the capabilities of Cisco’s Unified Computing System portfolio in a half-width blade form factor. The Cisco UCS B200 M3 harnesses the power of the latest Intel® Xeon® E5-2600 v2 and E5-2600 series processor family CPUs with up to 768 GB of RAM (using 32 GB DIMMs), 2 drives, and up to 80 Gbs throughput connectivity. SpecificationsHeight: 1.95 in. (50 mm)Width: 8.00 in.(203 mm)Depth: 24.4 in. (620 mm)Weight: Base server weight (no CPUs, no HDDs, no mezzanine adapters or memory) = 9.62 lbs (4.36 kg), Minimally configured server (1 HDD, 2 CPUs, a VIC 1340/1240 but no mezzanine adapter) = 12.50 lbs (5.67 kg), Fully configured server (2 HDDs, 2 CPUs, all memory, VIC 1340/1240 and mezzanine adapter both populated) = 14.98 lbs (6.79 kg) The Cisco UCS 2208XP Fabric Extender (Figure 3) has eight 10 Gigabit Ethernet, FCoE-capable, Enhanced Small Form-Factor Pluggable (SFP+) ports that connect the blade chassis to the fabric interconnect. Each Cisco UCS 2208XP has thirty-two 10 Gigabit Ethernet ports connected through the midplane to each half-width slot in the chassis. Typically configured in pairs for redundancy, two fabric extenders provide up to 160 Gbps of I/O to the chassis.SpecificationsHardware forwarding at 640 GbpsLow-latency cut-through design, providing predictable, consistent traffic latency regardless of packet size, traffic pattern, or enabled featuresLayer 2 VLAN trunksIEEE 802.1Q VLAN encapsulationSupport for up to 1024 VLANs and virtual SANs (VSANs)Support for Cisco Data Center VM-FEX architectureJumbo frames on all ports (up to 9216 bytes)Pause frames (IEEE 802.3x)Layer 2 IEEE 802.1p (class of service [CoS])CoS-based egress queuingEgress strict-priority queuingEgress port-based scheduling: Weighted Round-Robin (WRR)Eight hardware queues per port The Cisco UCS VIC 1240 enables a policy-based, stateless, agile server infrastructure that can present up to 256 PCIe standards-compliant interfaces to the host that can be dynamically configured as either network interface cards (NICs) or host bus adapters (HBAs). In addition, the Cisco UCS VIC 1240 supports Cisco Data Center Virtual Machine Fabric Extender (VM-FEX) technology, which extends the Cisco UCS fabric interconnect ports to virtual machines, simplifying server virtualization deployment.SpecificationsPorts Qty: 4 portsData Link Protocol: 10 GigE, 10Gb FCoEThroughput: 40 GbpsCompliant Standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.1Qbb, IEEE 802.1QazFeatures: VLAN support, priority-based flow control, Jumbo Frames supportMin Operating Temperature: 50 °FMax Operating Temperature: 95 °FDimensions (WxDxH): 3.7 in 7.2 in VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED £14,000 excluding VAT VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK LA 108819 DUP W/ SERVERS - 10 CPU TKNLA 111718 (RAILS) - L59 BAY 3, TROLLEY 4 TOP136565 rails - maybe had this new stock no. ?112123 4 x HS 700-33891-01120555 - 2 x HS SLD120612 - 2 x HS SLD122001 -2 x HS122241 - 2 x HS122257 - 4 x HS