S26361-F3961-E1

Fujitsu S26361-F3961-E1 FC CTRL 8GB/S 1CH LPE1250-MMF LCNew Pulls from new servers Low profile card with full height bracket.Product Specifications MANUFACTURERFUJITSUMANUFACTURER PART #S26361-F3961-E1PRODUCT DESCRIPTIONFC CTRL 8GB/S 1CH LPE1250-MMF LCDEVICE TYPENETWORK ADAPTERFORM FACTORPLUG-IN CARDINTERFACE (BUS) TYPEPCI EXPRESS 2.0 X4PCI SPECIFICATION REVISIONPCIE 2.0PORTS8GB FIBRE CHANNELAPPROXIMATE DIMENSIONS (WXDXH)6.6 IN X 2.7 INCABLING TYPEFIBER OPTICDATA LINK PROTOCOL8GB FIBRE CHANNEL (SW)DATA TRANSFER RATE8.5 GBPSUnparalleled manageability, reliability, performance and ease of deploymentStreamlined installation and management, unrivaled scalability and industry-leading virtualization support make the single-channel Emulex LightPulse LPe1250 Fibre Channel Host Bus Adapter (HBA) an ideal solution for enterprise, mixed-operating system (OS) and virtual server environments. With powerful management capabilities and broad platform support, they deliver maximum performance in the broadest range of applications and environments.Proven design, architecture and interfaceEmulex LightPulse HBAs' highly integrated processor design minimized onboard components to improve host performance and efficiency. Advanced error-checking features ensure the integrity of block data as it traverses the Storage Area Network (SAN). Emulex's firmware-based architecture enables feature and performance upgrades without costly hardware changes. The unique Service Level Interface (SLI™) allows use of a common driver across all models of Emulex HBAs on a given OS platform. Installation and management facilities are designed to minimize server reboots and further simplify deployment.Key FeaturesPCIe 2.0 bus-compliant, with PCIe 1.0 backward compatibility supportedSupport for Message Signaled Interrupts eXtended (MSI-X), improves host utilization & enhances application performanceSupport for 8Gb/s, 4Gb/s and 2Gb/s Fibre Channel devicesComprehensive virtualization capabilities with support for N_Port ID Virtualization (NPIV) and Virtual FabricHost-to-Fabric FC-SP authenticationBlockGuard®-ready - ensures end-to-end data integrityCommon driver model allows a single driver to support all Emulex HBAs on a given OSEasy deployment of new firmware with minimal server rebootsEfficient centralized administration of Emulex HBAs via powerful management toolsKey BenefitsProvides superior performance for the enterpriseIntegrates seamlessly into existing SANsSupports IT server consolidation and energy conservation initiativesAllows application of SAN best practices, tools and processes with virtual server deploymentsAssures data availability and data integrityImproves IT staff productivity through simplified deployment and managementPerformance FeaturesDoubling the maximum Fibre Channel link rate from 4Gb/s to 8Gb/s and enhanced virtualization capabilities help support IT "Green" initiativesFrame-level multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance.Data Protection FeaturesEnd-to-end data protection with hardware parity, CRC, ECC and other advanced error-checking and correcting algorithms ensure data is safe from corruption.Deployment and Management FeaturesUniversal boot capability allows the appropriate boot environment to be automatically selected for any given hardware.Boot-from-SAN capability reduces system management costs and increases uptime.Detailed real-time event logging and tracing enables quick diagnosis of SAN problems.Beaconing feature flashes the HBA LEDs, simplifying their identification within server racks.Environmental monitoring feature helps to optimize SAN availability. StandardsANSI Fibre Channel: FC-PI-4, FC-FS-2, FC-FS-2/AM1, FC-LS, FC-AL-2, FC-GS-6, FC-FLA, FC-PLDA, FC-TAPE, FC-DA, FCP through FCP-4, SBC-3, FC-SP, FC-HBA and SMI-S v1.1PCI Express base spec 2.0PCI Express card electromechanical spec 2.0Fibre Channel class 2 and 3PHP hot plug-hot swapArchitectureSingle-channel8Gb/s, 4Gb/s or 2Gb/s FC link speeds automatically detectedIntegrated data buffer and code space memoryComprehensive OS SupportWindows, Linux, NetWare, VMwareView OS versions and available driversHardware Environmentsx86, x64 and Intel® Itanium® 64-bit processor familyOpticalData rates: 2.125, 4.25 and 8.5Gb/s (auto-detected)Optics: Short wave lasers with LC type connectorCable: Operating at 8Gb/s50/125 microns (500MHz*km BW) up to 50m50/125 microns (2000MHz*km BW) up to 150mPhysical DimensionsShort, low profile MD2 form factor card167.64mm x 68.91mm (6.60" x 2.71")Standard bracket (low profile available)Power & Environmental RequirementsVolts: +3.3, +12Operating temperature: 0° to 55°C (32° to 131°F)Airflow required: 150 lf/m'Storage temperature: -40° to 70°C (-40° to 158°F)Relative humidity: 5% to 95% non-condensing23 degree C wet bulbAgency ApprovalsClass 1 Laser Product per DHHS 21CFR (J) and EN60825-1UL recognized to UL 60950-1CUR recognized to CSA22.2, No. 60950-1-03Baurt-certified to EN60950-1FCC Rules, Part 15, Class AICES-003, Class AEMC Directive 2004/108/EC (CE Mark)EN55022, Class AEN55024Australian EMC Framework (C-Tick Mark)AS/NZS CISPR22, Class AVCCI (Japan), Class AMIC (Korea), Class ABSMI (Taiwan), Class AEU RoHS Compliant (Directive 2002/95/EC)China RoHS CompliantAdditional FeaturesPerformance FeaturesDoubling the maximum Fibre Channel link rate from 4Gb/s to 8Gb/s and enhanced virtualization capabilities help support IT “Green” initiativesFrame-level Multiplexing and out-of-order frame reassembly increases link efficiency and maximizes HBA performance.Data Protection FeaturesEnd-to-end data protection with hardware parity, CRC, ECC and other advanced error checking and correcting algorithms ensure data is safe from corruption VAT @ 20% INCLUDED IN PRICE - VAT INVOICE PROVIDED £100 + VAT VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE OF THE UK